TILE PAINT 2K resin (without hardener)
The TILE PAINT 2K resin (A-component) is mixed with the TILE PAINT 2K hardener (B-component). Both components together form the TILE PAINT 2K epoxy resin system.
It is designed for painting tiles on walls and floors that are subject to heavy wear and tear. This paint is very durable and easy to apply. It is odourless and free of solvents that are hazardous to health.
Volumes de consumo: 120-150g/m² par coating on smooth and non-absorbent surfaces.
Instruções de Utilização
- Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
- Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
- Mix the resin A-component with the hardener B-component in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
- Apply a coat of paint with a brush or foam roller and let the it dry (aprox. 12h at 20°C). (Pot Life/Processing Time: at 20°C: aprox. 50 minutes, at 25°C: aprox. 35 minutes)
- Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
- As an option, tile joints can be re-done with our practical EPODEX grouting pen.
Recomendações: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.
Valor limite da UE: (Cat. A/d): 140g/L (2010), máx. 140g/L COV
Serviço de Apoio ao Cliente:Se tiver mais perguntas, contacte-nos por telefone, e-mail ou utilize o nosso serviço de apoio WhatsApp.
Nota:Devido a diferentes condições de iluminação e monitores, as cores podem não ser apresentadas de forma uniforme.
Declarações de Ingredientes, Segurança e Perigo
Componentes A (TILE PAINT 2K) Danger: Polymer epoxy resin adduct; CAS-No.: 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy compounds. May produce an allergic reaction.
Componentes A (TILE PAINT 2K Polar White) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Componentes A (TILE PAINT 2K PASTEL) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
