EPODEX – Resin (without Hardener)
The resin A-component must be mixed with the hardener B-component before use. The Epoxy Systems, consisting of the resin and hardener, are suitable for a wide range of applications such as civil, electrical and mechanical engineering. It is a classic coating, laminating and repairing epoxy resin. It can be used as casting resin in layers up to 10cm thick. Coat your floors, table tops and other objects. Our EPODEX Epoxy Systems are miscible with all our colour pigments.
Instruções de Utilização
- Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin (to prime floors and other coloured substrates we recommend using our water-based epoxy resin EPOXY PRIMER system).
- Mix te resin A-component with the hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
- Paint the epoxy primer with a paint roller or brush on the desired surface. Let the primer cure.
- Continue with the Revestimento principaling in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
- To colour the Revestimento principaling, mix the supplied colour with the resin A-component or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigment.
Informação: A resina epóxi é sensível a qualquer tipo de humidade durante a cura (risco de formação de blush de amina, ou seja, manchas brancas na camada superior). Por esta razão, recomendamos que se evite qualquer contacto entre a água e o epóxi até que este esteja completamente curado (pelo menos 7 dias). No caso de camadas finas, temperaturas frias (temperaturas ambiente, do substrato e da resina inferiores a 20°C) e humidade elevada, o tempo até à cura completa da resina epóxi pode ser prolongado.
Volumes de consumo
Determine a quantidade de resina necessária com a ajuda da nossa “Calculadora de resina epóxi” nesta página do produto.
Espessuras recomendadas para o revestimento de superfícies
- Overall coating (primer + Revestimento principaling): aprox. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
- Primer: aprox. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
- Main layer: aprox. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm
Recommended amount of colouring agent perkg of resin+hardener:
- Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
- Transparent dyes (except white, black and grey): 60 drops (1,8g),
- Transparent white, black and grey dyes: 20 drops dye (0,6g),
- Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
- Semi-transparent white: 60 drops of white dye (1,8g),
- RAL solid colour: 1% (10g),
- Glitter pigments: 1% (10g)
Serviço de Apoio ao Cliente:Se tiver mais perguntas, contacte-nos por telefone, e-mail ou utilize o nosso serviço de apoio WhatsApp.
Nota:Devido a diferentes condições de iluminação e monitores, as cores podem não ser apresentadas de forma uniforme.
Declarações de Ingredientes, Segurança e Perigo
Componentes A (ECO) Warning: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy constituents. May produce an allergic reaction.
Componentes A (PRO) Warning: Bis-[4-(2,3-epoxipropoxi)phenyl]propane Oxirane, mono[(C12-14-alkyloxy)methyl] derivative Pentamethyl piperidyl sebazate Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. Collect spillage.
