TILE PAINT 2K gyanta (keményítő nélkül)

1. Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
2. Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
3. Mix the resin A-komponens with the hardener B-komponens in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
4. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-komponens and hardener B-komponens are completely mixed together.
5. Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
6. Apply a coat of paint with a brush or foam roller and let the it dry (approx. 8h at 20°C). (Pot Life/Processing Time: at 20°C: approx. 50 minutes, at 25°C: approx. 35 minutes)
7. Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
8. As an option, tile joints can be re-done with our practical EPODEX grouting pen.

Recommendations: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Ha további kérdése lenne, kérjük, forduljon hozzánk bizalommal telefonon, e-mailen vagy WhatsApp ügyfélszolgálatunkon keresztül.

Megjegyzés: Felhívjuk figyelmét, hogy az eltérő fényviszonyok és monitorok miatt előfordulhat, hogy a színek nem egyformán jelennek meg.

A-komponens: Attention: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({ 2-[4-(oxiran-2ylmethoxy)benzyl]phenoxy} methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs.

Danger Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long-lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents and container in accordance with all local, regional, national or international regulations.