Gyanta (keményítő nélkül)

1. Always start with an epoxi resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxi resin (to prime floors and other coloured substrates we recommend using our water-based epoxi resin EPOXY PRIMER system).
2. Mix te resin A-komponens with the hardener B-komponens in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
3. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-komponens and hardener B-komponens are completely mixed together.
4. Pour the the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
5. Paint the epoxi primer with a paint roller or brush on the desired surface.
6. Let the primer cure. The curing time depends on the temperature and the layer thickness. You can find more detailed information in our information table ander the “Learn more” button on this product page.
7. Continue with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
8. To colour the main coating, mix the supplied colour with the resin A-komponens or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigment.

Info: Epoxi resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxi until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxi resin is fully cured may be extended.

Determine the required amount of resin needed with the help of our epoxi resin “Epoxi calculator” on this product page.

Recommended thicknesses when coating floors and other surfaces

• Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
• Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
• Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm

• Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
• Transparent dyes (except white, black and grey): 60 drops (1,8g),
• Transparent white, black and grey dyes: 20 drops dye (0,6g),
• Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
• Semi-transparent white: 60 drops of white dye (1,8g),
• RAL solid colour: 1% (10g),
• Glitter pigments: 1% (10g)

Ha további kérdése lenne, kérjük, forduljon hozzánk bizalommal telefonon, e-mailen vagy WhatsApp ügyfélszolgálatunkon keresztül.

Megjegyzés: Felhívjuk figyelmét, hogy az eltérő fényviszonyok és monitorok miatt előfordulhat, hogy a színek nem egyformán jelennek meg.

Attention: 2,2 '- [(1-methylethylidene) bis (4,1-phenyleneoxymethylene)] bisoxirane Reaction mass of 2,2' - [methylenebis (4,1-phenyleneoxymethylene)] dioxirane and [ 2 - ({2- [4- (oxirane-2-ylmethoxy) benzyl] phenoxy} methyl) oxiranes and [2,2 '- [methylene bis (2,1-phenyleneoxymethylene)] dioxirane oxiranes, mono (C 12-14 alkyloxy) methyl) derivs.

PRO (A-komponens) Attention: reaction product: bis- [4- (2,3-epoxipropoxi) phenyl] propane oxirane, mono [(C12-14-alkyloxy) methyl] derivative.

Danger Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Toxic to aquatic life with long-lasting effects. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents and container in accordance with all local, regional, national or international regulations.