There are many reasons for choosing epoxy resin flooring. It is tough, resilient and cost-effective. The installation is comparably easy and it requires low maintenance.
On top of that, you can dye your resin flooring in almost any colour from our wide range of floor kits.
Can be used on all surfaces such as concrete, screed, wood and more
Layer thickness: approx. 0,4-1,5mm
Working time: approx. 120min.
Curing time: approx. 24h
Application instructions can be found on this product page
Do you want to protect your floor from stains, high loads or wear and tear? An epoxy resin flooring is a right choice for you! Our epoxy resin is easy-to-apply, temperature-stable, extremely tough and resilient. It allows excellent insulation and is resistant to stains.
Furthermore, resin flooring makes your floor weatherproof and very easy to clean. It does not require high maintenance and can be cleaned with regular all-purpose cleaners. Therefore, it does not come as a surprise that resin floors are mainly used in industry. To install resin flooring yourself, you do not need any special expertise.
Install Resin Flooring Yourself
Before you start coating your floor, you have to measure the surface to be coated and decide what layer thickness is required for your purposes. Depending on the load, we recommend layer thicknesses from 1.2 to 3.5mm. The average resin flooring is between 2 and 2.5mm.
For small spaces, such as garages with an average size of 10m², you will need approximately 18kg of epoxy resin for 2mm layer thickness. You can determine the exact amount of resin you need with our epoxy resin calculator.
For the best possible result, you start your project by cleaning the surface thoroughly. Remove all dust and stains and fix any holes or cracks with epoxy putty. This way, you will get a clean and smooth surface to seal with epoxy resin. Make sure to mask the floor ends and edges.
Then you can start with a thin primer of 0.2 to 0.5mm. Our epoxy primer is ideally suited for that. You just have to mix the required amount of WB pigment with the 1 component system and apply it with a foam roller or squeegee. It is advisable to paint crosswise to close all pores and let the primer cure. This ensures proper sealing and minimum material loss. Once the primer has cured, you can start with the main coating of your resin floor.
For a glossy, durable finish of coloured resin flooring, you can add a third layer of clear casting resin. Please note the exact curing time in doing so. You will find detailed application instructions and examples on our product pages.
EPODEX Provides You with a New Resin Flooring
In our online shop, you will find everything you need to install resin flooring in your home, business or warehouse.
If you have any questions concerning our products or the amount of epoxy resin you need for your floor, please do not hesitate to contact us.
You can reach us during business hours by phone and via WhatsApp or send us an e-mail at any time.
