PRO+ System (Epoxy Resin + Hardener)

PRO+ System (Epoxy Resin + Hardener)

Max. Pouring height 5cm. For tables and other clear and coloured projects with large mould or castings

3 reviews
Delivery time: 1-3 working days
  • Can be used on all surfaces such as wood, concrete, glass and more
  • Max. thickness per layer: 5cm (heights up to 30cm possible for small castings)
  • Working time: approx. 6h, Curing time: 48-72h
  • Scope of delivery: Resin A and hardener B (Mixing ratio 2:1)
  • Conveniently select a colour to colour the clear epoxy resin

  • Epoxy resin systems
    Legend:
    ✓ Ideally suited. X Not suited. ~ Not ideal, but can be used.
    ECO PRO ECO+
    PRO+    		 ECO MAX
    PRO MAX
    Mixing Ratio by Weight Resin (A) : Hardener (B) 100:50 100:50 100:50 100:50
    Applications
    Coating ✓ ✓ ~ ~
    Laminating ✓ ✓ ~ ~
    Sealing ✓ ✓ ~ ~
    Pouring ~ ✓ ✓ ✓
    Repairing ✓ ✓ ~ ~
    Glueing ✓ ~ ~ ~
    Application Areas
    Priming, Coating and Sealing of Floors (Industrial Floors, Garages, Interior Floors, Bath etc.) ✓ ✓ X X
    Coating and Sealing of Tables, Countertops and Other Furniture/Objects ✓ ✓ ~ ~
    Sealing of Pictures ✓ ✓ X X
    Pouring of Tables (River-Tables) ~ ~ ✓ ✓
    Creation of Jewellery and Small Castings up to 2cm Height ✓ ✓ ~ ~
    Casting of large pieces in one pour X X ✓ ✓
    Isolation of Electrical Circuits and Terminal Points ✓ X X X
    Use in Aircraft, Ship and Model Construction ✓ ✓ ~ ~
    Bonding and Sealing of Concrete, Wood, Plastic, Hard Foam, Natural Stone, Fibreglass and Other Materials ✓ ~ ~ ~
    Processing Characteristics
    Wood Turning ✓ ✓ ✓ ✓
    Sandable ✓ ✓ ✓ ✓
    Polishable ✓ ✓ ✓ ✓
    Max. Pouring Height per Process11cm 2cm 5cm 10cm
    Waiting Time until Further Casting2 6h 12h 48-72h 72-96h
    Gelling Time and Pot Life 25min (100g) 65min (145g) 6h (10kg) 8h (10kg)
    Min. Processing Temperature 15°C 15°C 15°C 15°C
    Recommended processing temperature 20°C 20°C 20°C 20°C
    Max. Relative Humidity during Processing 70% 70% 70% 70%
    Max. Material Shrinkage 1% 1% 1% 1%
    Processing Time (at 20°C)
    At Layer Height 0-3mm 60min 120min 360min 480min
    At Layer Height 1cm 25min 90min 360min 480min
    At Layer Height 2cm X 60min 360min 480min
    At Layer Height 5cm X X 240min 360min
    At Layer Height 10cm X X X 360min
    Technical Properties
    Touchable / Accessible after 24h 24h 48-72h 96h
    Completely Chemically Cured after 7 days 7 days 14 days 14 days
    Transparent Resin ✓ ✓ ✓ ✓
    Crystal Clear Curing X ✓ X (ECO+)
    ✓ (PRO+)    		 X (ECO M)
    ✓ (PRO M)
    Max. Possible UV Stabilisation3 X ✓ X (ECO+)
    ✓ (PRO+)    		 X (ECO M)
    ✓ (PRO M)
    Self-Venting ✓ ✓ ✓ ✓
    Bubble Free ✓ ✓ ✓ ✓
    Self-Leveling ✓ ✓ ✓ ✓
    Solvent-Free ✓ ✓ ✓ ✓
    VOC Free4 X ✓ X (ECO+)
    ✓ (PRO+)    		 X (ECO M)
    ✓ (PRO M)
    BPA Free5 ✓ ✓ ✓ ✓
    Plasticiser Free (Phthalate) ✓ ✓ ✓ ✓
    Resistant to Chemicals ✓ ✓ ✓ ✓
    Scratch Resistant6 ✓ ✓ ✓ ✓
    Doming Effect (Depth Effect) ✓ ✓ ✓ ✓
    Miscible with all EPODEX Colours (Except WB PIGMENT) ✓ ✓ ✓ ✓
    Suitable for Underfloor Heating ✓ ✓ ✓ ✓
    Suitable for Outdoor Use X ✓ X (ECO+)
    ✓ (PRO+)    		 X (ECO M)
    ✓ (PRO M)
    High Adhesion ✓ ✓ ✓ ✓
    Density (g/cm)3 1.1 1.1 1.1 1.1
    Viscosity (mPa·s) 700 530 350 350
    Max. Heat Deflection Temperature7 60°C 60°C 60°C 60°C
    Min. Heat Deflection Temperature -30°C -30°C -30°C -30°C
    SHORE Hardness after Curing (D1) 87 82 80 80
    Storage Temperature 10-30°C 15-30°C 15-30°C 15-30°C
    Shelf Life 12 Months 12 Months 12 Months 12 Months
    Shelf Life after Opening8 6 Months 6 Months 6 Months 6 Months
    1. Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 15x15cm, casting heights of up to 50cm can be achieved in one casting process
    2. There is no maximum time limit to pour the next layer.
    3. No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    4. When properly used and completely cured, it is VOC free..
    5. According to formula without free BPA.
    6. Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    7. The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
    8. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

Calculate quantity
Length (cm)
Width (cm)
Height (cm)
Required amount in KG KG
Required amount in g g
Apply Quantity
Calculate quantity
Equipment
SKU: sys-proplus Categories: ,

Exceptional quality - directly from the manufacturer!

With our premium epoxy resin, PRO+ you can reach high and realise pours up to 5cm height in one pouring process. Pour large river tables, lamps, and other tall projects in no time.

100% safe epoxy resins

Play it safe with your health! EPODEX epoxy resins are non-toxic (according to GHS06) and not hazardous to health (according to GHS08) according to the hazardous substance legislation of the EU and Switzerland. Our high-quality epoxy resins are 100% solvent-free and, according to the formulation, do not contain any free bisphenol A (i.e., BPA-free), which is harmful to health. This guarantees pleasant processing.
rivertable epoxy resin

No. 1 casting resin with bubble-free curing

No more annoying air bubbles and unevenness! Our epoxy resins self-vent at room temperature. This means that all air bubbles caused by mixing and pouring disappear on their own before the epoxy cures. You do not need a heat gun to remove the bubbles. This means that there is no risk of soot stains on your epoxy resin.
blasenfrei epoxidharz epodex 2

Crystal clear & UV stabilised

Don't compromise and choose the clearest epoxy resin on the market. Get a *money-back guarantee now: If you find a resin that is clearer than our PRO+ epoxy, we'll give you your money back! (*valid up to 30 days after order). Our PRO+ epoxy resin also offers the maximum possible UV protection. In this way, we effectively counteract the UV-induced yellowing of the casting resin.
kristallklares epoxidharz epodex
Equipment

EPODEX – PRO+ System

The epoxy resin PRO+ system is suitable for a wide range of applications. It is our high-quality casting resin designed to make river tables and other large items. The PRO+ system is miscible with all our colour pigment.

Instructions for use

  1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin. As an alternative, you can also use our PRO system for the primer. The PRO system has the advantage of being designed for thinner layers and cures within 16-24hours.
  2. Mix the PRO resin A-component with the PRO+ hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
  3. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
  4. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Let the primer cure.
  5. You can find more detailed information in our information table under the “Learn more” button on this product page.
  6. Continue with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
  7. To colour the main coating, mix the supplied colour with the resin A-component or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigments.

Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.

Consumption volumes

Determine the required amount of resin needed with the help of our epoxy resin “Epoxy calculator” on this product page.

Recommended amount of colouring agent per kg of resin+hardener:

  • Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
  • Transparent dyes (except white, black and grey): 60 drops (1,8g),
  • Transparent white, black and grey dyes: 20 drops dye (0,6g),
  • Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
  • Semi-transparent white: 60 drops of white dye (1,8g),
  • RAL solid colour: 1% (10g),
  • Glitter pigments: 1% (10g)

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Components (PRO) Warning: Bis-[4-(2,3-epoxipropoxi)phenyl]propane Oxirane, mono[(C12-14-alkyloxy)methyl] derivative Pentamethyl piperidyl sebazate Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. Collect spillage.

B-Components (PRO+) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.

5 3 reviews
1
0%
2
0%
3
0%
4
0%
5
100%
Leave your review
Rating
Publish review
Linkedin Whatsapp Mail
Related products
×

PRO+ System (Epoxy Resin + Hardener) has been added to your cart.

There are 0 items in your cart.

View cart Checkout