TILE PAINT 1K | Brown Colours

TILE PAINT 1K | Brown Colours

Delivery time: 1-3 working days
  • Area of application: Normally stressed wall tiles without permanent water contact.
  • Note: For heavily stressed wall and floor tiles, as well as tiles with permanent water contact, we recommend our waterproof Tile Paint 2K.
  • Gloss level: satin
  • Properties: low odour, abrasion-resistant, UV-resistant, high coverage
  • Consumption: 120-150g/m²
  • Working time: approx. 180min.
Product Properties
Application
Product Description Tile paint, tile varnish
Scope of Application Wall tiles without permanent water contact, i.e. without standing water
Field of Application Indoor and covered outdoor
Method of Application Paint, roll
Consumption* approx. 140g/m²
Range/Yield* approx. 7m²/kg
Odour Unfolding during processing Low (odourless)
Spray and Drip Behaviour Very low (no splashes)
Processing Temperature min. 8°C object and ambient temperature
Optimal Processing Temperature 20°C
Mixing Ratio by Weight Resin (A): Hardener (B) No mixing ratio, as one-component product
Pot Life at 20°C No pot life available
Technical Properties
Basic Compound Acrylic base
Gloss Level satin
Consistency medium viscosity, (drip resistance ensures application on vertical surfaces)
Opacity according to DIN EN 13300* High (class 1-2, 6-8m² per litre)
Coating's Advantages *abrasion-resistant, hard-wearing, scrub-resistant
Wet abrasion resistance DIN EN 13300* <5μm to 20μm (class 2)
Water vapour diffusivity DIN EN 1062-1 Medium (Class 2; diffusion-open; sd-value: <0.5m)
Diffusion-open, Breathable Yes
Colour Resistency High
Colour Intensity High
Paint's Structural Finish Fine structure, even coating pattern
UV-resistant Yes
Solvent-free No
Plasticiser-free Yes
VOC-free No
Susceptible to abrasion marks and shiny spots (so-called writing effect) Vulnerability with EPODEX WAX sealant low
Environmentally Friendly Yes
Proportion of Binder High (min. 20%)
Proportion of Pigment High (colour paste content: min. 10%)
Density (g/cm³) 1,2
pH-value approx. 8.5 -9
Maximum Grain Size fine (≤ 100 µm)
Dilutable Not dilutable
Tool Cleaning Immediately after use with water
Storage cool, dry and frost-free
Max. Storage Temperature 25°C
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.
    • 1x Nitrile Gloves
    • 1x Plastic Drop Cloth 50m2
    • 1x Masking Tape 5cmx50cm
    • 2x Sandpaper P180 and Sanding Block
    • 1x Stir Stick
    • 1x PRE-CLEANER Degreaser & Cleaner
    • 1x Flat Brush 2,5cm
    • 2x Foam Rollers 10cm + handle
    • 1x Paint Tray 16x30cm
    • 2x Exchangeable insert for paint tray 16x30cm
SKU: sys-fl-1k-bn Categories: ,

EPODEX 1K Tile Paint

EPODEX 1K Tile Paint is a water-based, low-odour acrylic paint. The paint is ideal for coating wall tiles. The good adhesion properties ensure easy application and a perfect result.

Paint your wall tiles yourself now at a low cost. For more inspiration on which colour to use and matching accessories, watch our designer’s tutorial!

Instructions for use - STEP BY STEP

  1. Sand the tiles with sandpaper.
  2. Cover/tape off surfaces that are not to be covered with a plastic drop cloth and masking tape.
  3. Pre-clean and degrease tiles with the EPODEX PRE-CLEANER.
  4. Mix the tile paint thoroughly.
  5. Apply the material and allow it to dry. Working time: approx. 2 hours at 20°C.
  6. Apply further coats until the desired opacity is achieved. We recommend approx. two coats.
  7. If desired, retouch the tile joints with the EPODEX grout pen and ruler.

EPODEX GROUT PEN - Order now!

With the EPODEX Grout Pen, you can paint your grout lines in white or in the classic shade of grey the pen is a special acrylic-based paint for colouring and refreshing tile grout.

Thanks to the flattened tip of the pen, the grout pen adapts to any grout line width and thus ensures quick and clean retouching of the tile grout lines in one single application. For a clean result, we recommend using a ruler.

Recommendations

Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the paint with up to 5% water. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Customer Service

If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

TILE PAINT 1K Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.

TILE PAINT 1K Polar White Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

TILE PAINT 1K PASTELWarning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

TILE PAINT 1K PASTEL+ Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.


Equipment
4.9 95 reviews
1
0%
2
0%
3
0%
4
13%
5
87%

Pictures from client projects

Leave your review
Rating