Epoxy Resin for Floor Coatings

Shop epoxy resin design floors, garages (garage sealers), basement floors, stone carpets, industrial and warehouse floors, etc.

£39.99

Can be used on all surfaces such as concrete, screed, wood and more
Layer thickness: approx. 1,5mm
Working time: approx. 120min.
Curing time: approx. 24h
Application instructions can be found on this product page

Properties

✓ Ideally suited.

X Not suited.

~ Not ideal, but can be used.

	ECO System
Mixing ratio by weight Resin (A): Hardener (B)	100:50
Applications
Coating	✓
Sealing	✓
Pouring	✓
Repairing	✓
Application areas (e.g.)
Priming, coating and sealing of floors (industrial floors, garages, interior floors, bath etc.)	✓
Coating and sealing of tables, countertops and other furnitures/objects	✓
Bonding and sealing of concrete, wood, plastic, hard foam, natural stone, fiberglass and other materials	✓
Processing caracteristics
Sandable	✓
Polishable	✓
Max. Pouring height per process at 20°¹	1cm
Waiting time until further casting at 20°² (Number of pourings: unlimited)	min. 6h
Gelling time and pot life (Gel Timer TECAM)	25min. (100g)
Min. Processing temperature	15°C
Max. processing temperature at max. casting height	20°C (1cm)
Max. processing temperature at 1mm coating height	35°C
Max. relative humidity during processing	70%
Max. Material shrinkage after processing	1%
Processing time (at 20°C)
At layer height 0-3mm	60min.
At layer height 1cm	25min.
At layer height 2cm	X
Touchable / Accessible on foot / Demoldable (at 20°C)
At layer height 0-3mm	after 20h
At layer height 1cm	after 20h
At layer height 2cm	X
Completely chemical curing	after 7 days
Technical properties
Transparent resin	✓
Crystal clear curing	X
Max. possible UV protection³	X
Self-venting	✓
Bubble free	✓
Self-leveling	✓
Solvent-free	✓
VOC free⁴	X
BPA free⁵	✓
Plasticizer free (Phthalate)	✓
Resistant to chemicals	✓
Scratch resistant⁶	✓
Doming effect (depth effect)	✓
Miscible with all EPODEX colors (except WB PIGMENT)	✓
Suitable for underfloor heating	✓
Suitable for outdoor use	X
High adhesion	✓
Density (g/cm³)	1,1
Viscosity (mPa·s)	700
Max. heat deflection temperature⁷	60°C
Min. heat deflection temperature	-30°C
SHORE hardness after curing (D1)	87
Storage temperature	10-30°C
Shelf life	12 months
Shelf life after opening⁸	6 months

Coating above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur.
There is no maximum time limit to pour the next layer.
No epoxy resin is completely UV resistant. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a topcoat, you can increase UV resistance even further. Possible topcoats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
When properly used and completely cured, it is VOC free.
According to formula without free BPA.
Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a topcoat. Possible topcoats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

1. Select colour