PU FILLER
Stone Carpet Sealant
Apply to stone carpet for full waterproofing and to seal all the gaps between the stone aggregates.
Properties: Weatherproof, UV-resistant, waterproof even with constant water exposure (e.g. swimming pools)
- Consumption Volume: 1kg/m² for 2-4mm stone aggregate
- Processing Time: 30min at 20°C
- Drying Time: 24h at 25°C
1. Select quantity
PU FILLER is a single-component, fully aliphatic polyurethane-based sealant, primarily used to seal EPODEX stone carpet. The PU FILLER closes the pores of the stone carpet, creating a completely waterproof and easy-to-clean surface. The PU FILLER is essential for wet areas, showers, and pools. Once fully cured, PU FILLER forms a transparent film on the stone carpet surface, enhancing its mechanical, chemical (e.g. resistance to limescale and chlorine), and thermal durability while ensuring complete waterproofing.
Instructions for Use
- Ensure the substrate is load-bearing, clean, and free from any substances that may prevent proper adhesion.
- Apply the material to the stone carpet using a spatula or similar tool.
- Spread evenly and remove any excess material with a rubber squeegee, ensuring all gaps ("pores") between the stone aggregates are sealed. A single application is recommended. Processing time at 20°C: approx. 30min.
- Allow the material to dry. Drying time at 25°C: 24h.