Instructions for Use
Primer with PRIMER
- We recommend a working temperature of approx. 20°C.
- The surface should be dust-free, clean, and even. Level out holes, unevenness, and slopes in advance with levelling compound.
- Always start with our PRIMER.
- Mix the primer thoroughly and dye it with WB pigment in anthracite grey or light grey.
- Pour the material into a paint tray after mixing.
- Roll the material onto the desired surface with a paint roller.
- Allow the primer to dry (approx. 8-12 hours).
Main Coating with EFFECT PAINT
- Use our EFFECT PAINT for a metallic brush effect.
- First, mix the EFFECT PAINT with the supplied metallic pigment PLATINUM SILVER. We recommend adding approx. 1.5%, e.g. 15g of PLATINUM SILVER metallic pigment to 1kg of EFFECT PAINT.
- Then, mix the EFFECT PAINT with the supplied metallic pigment PEARL WHITE (add approx. 1.5%, e.g. 15g metallic pigment PEARL WHITE to 1kg EFFECT PAINT) and apply the paint wet-on-wet to the first layer in PLATINUM SILVER.
- Paint the material onto the primed surface.
- The paint is dust-dry after approx.5 hours.
Sealing with PU
- Coat the surface with the PU resin.
- To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU glossy: 10:2 by weight (e.g.: 1kg A + 0.2kg B); PU matt: 10:1 by weight (e.g.: 1kg A + 0.1kg B). Optionally, you can add up to 20% water.
- Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
- We recommend mixing smaller quantities of approx.1kg per coat, as the material, is very productive and sets quickly (pot life: 60 min. with 1kg).
- Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. We recommend a layer thickness of max.150µm.
- The material can be walked on after approx. 20-24 hours and is completely chemically cured after approx.7 days.
Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity in order to avoid an orange peel texture.
Consumption volumes
Recommended thicknesses when coating floors and other surfaces
- Overall coating (primer + main coating + sealing): approx. 330-380g/sqm
- Primer: approx. 120-150g/sqm
- Main layer: approx. 110-130g/sqm
- Sealing: approx. 100g/sqm
Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
A-Components (PU Matt) Contains: N-BUTYL METHACRYLATE: May produce an allergic reaction. Mixture of: a -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-hydroxypoly(oxyethylene); a -3-(3-(2Hbenzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-: May cause an allergic reaction. Decanedioic acid, bis(1,2,2,6,6-pentametyl-4-piperidinyl) ester: May cause an allergic reaction.
B-Components (PU Matt) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.
B-Components (PU Glossy) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.
METALLIC BRUSH EFFECT Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/mist/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
PRIMER Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
