Microcement set for floors

Name: Microcement set for floors
SKU: sys-micro-boden
Price: 89.99 EUR
Availability: InStock

Microcement set for floors

Microcement of premium quality for floor surfaces of all kinds indoors and outdoors. Living areas, commercial spaces, stairs, and more.

10 reviews

Delivery time: 1-3 working days

Design filler applicable on all surfaces such as concrete, metal, plastic, wood, etc.
Material: Microcement medium/large (component A) and acrylic resin (component B)
Characteristics: High load-bearing capacity, weatherproof, UV-resistant, odourless
Areas of application: Interior & exterior as well as damp rooms with PU sealing
We recommend 2 layers: Layer 1 (large): 1.6kg/m², Layer 2 (large or medium): 1.2kg/m²
Waiting time between layers: min. 8h max. 24h
Scope of delivery for 7m² (Medium-grained): 14kg large + 7kg medium + 6kg acrylic resin + colourants
Scope of delivery for 7m² (Large-grained): 21kg large + 6kg acrylic resin + colourants

Application
Product Description	Microcement, nano concrete, design levelling compound
Area of Application	Area of Application Close to all walls and floors, furniture etc., walls, facades, stairs, industrial halls, cellars etc.
Field of Application	Indoor & Outdoor use and damp rooms
Method of application	Trowel
Self-levelling	minimal; must be spread and smoothed out with a trowel
Consumption Quantity Floor	Layer 1 (Large): 1.6kg/m², Layer 2 (Large or Medium): 1.2kg/m²
Consumption Quantity Wall	Layer 1 (Medium): 1.2kg/m², Layer 2 (Medium or Fine): 1kg/m²
Odour development during application	Low (according to amine)
Spray and Drip Behaviour	Depending on processing consistency, dripping possible on wall surfaces
Application Temperature	Substrate and ambient temperature must be min. 10°C and max. 30°C
Optimum Processing Temperature	20°C
Mixing ratio by weight Powder (A): Liquid (B)	Fine: 100:35, Medium: 100:20, Large: 100:25
Pot Life at 20°C	120 minutes for 10kg
Recommended layer thickness	fine 1mm; medium and large 1.5mm
Recommended number of layers	min. 2 layers
Waiting time between layers	max. 24 hours
Waiting time before painting over with another product	after 48 hours
Primer on absorbent substrates	Deep Primer 1K recommended
Primer on non-absorbent substrates	Primer 2K recommended
Max. humidity level during application	60%
Technical Properties
Material Base	Cement
Component A	Powder for Microcement and Quartz
Component B	Acrylic Resin in Water Dispersion
Gloss Level	Satin matt. High gloss and dull matt possible with PU sealer
Consistency	High viscosity, viscosity can be adjusted depending on the amount of LIQUID (B) added.
Coverage	Highly Opaque
Surface Finish	Highly durable, abrasion-resistant, hard-wearing, scrub-resistant
Scratch Resistance/Abrasion Resistance	Reinforced by the application of PU and recommended for heavily used surfaces and wet areas
Compressive Strength after 7 days	≥ 12.0 MPa (EN 13892-2)
Compressive Strength after 28 days	≥ 20 MPa (EN 13892-2)
Flexural Strength after 7 days	4.0 MPa (EN 13892-2)
Flexural Strength after 28 days	7.0 MPa (EN 13892-2)
Fire resistance class	Efl EN 13501-1
Shore Hardness	≥80
Elasticity¹	Not elastic; glass fibre mesh must be incorporated on substrate susceptible to vibrate
Open to diffusion, breathable	Yes (unless 2 or more layers of PU sealant are applied)
Application in Wet Areas	Not recommended without Pu sealant in wet areas
Colour Fastness	High
Colour Intensity	High
Colour Appearance	For walls: Fine/medium texture - For floors: Medium/Large texture
UV-resistant	UV-Stable
Solvent-Free	Yes
Plasticiser-Free	Yes
VOC-Free	Yes
Susceptible to abrasion marks and gloss spots (so-called writing effect)	Low (Touch-Protect-System)
Environmentally Friendly	Yes
Pigment Content	2-10% depending on desired colour intensity, recommended 2%
Density (g/cm³)	800 - 1300 kg/m³
Maximum Grain Size	Large (450µm), Medium (330µm), Fine (80µm)
Dilutable	Fine: max. 100:40, medium: max. 100:23, large: max. 100:28
Tool Cleaning	Tool Cleaning Immediately after use with acetone/thinner
Chemical Resistance	Acids, alkalis and chlorine should be avoided
Surface Cleaning	Light surfactants (do not use acidic or chlorinated cleaners or alkaline solutions)
Storage Temperature	Airtight, cool, dry, and frost-free
Max. Storage Temperature	25°C
Min. Storage Temperature	10°C
Minimum Shelf Life	Unopened 12 months, Open 6 months

If the substrate presents expansion joints, these must be taken into account when applying microcement. The expansion joint must either be reinforced with fibre glass mesh or a joint must be included into the microcement. Rooms larger than 50m² should always include expansion joints. Ignoring existing expansion joints or not including them when needed can lead to the microcement cracking.

*1. Select colour
*2. Select Grain Size

Large-grained (Layer 1: large + Layer 2: large)

Medium-grained (Layer 1: large + Layer 2: medium)
*3. Quantity (*m²) for 2 coats

*3. Quantity (*m²) for 2 coats

*3. Quantity (*m²) for 2 coats

*3. Quantity (*m²) for 2 coats

*3. Quantity (*m²) for 2 coats
*4. Order PU Sealer at the same time?
For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

*

*

SKU: sys-micro-boden Categories: All, Microcement after application

Microcement Design

EPODEX microcement is a special levelling compound for designing floors, walls, stairs, tables, and other surfaces in a modern seamless design. Create a unique, contemporary ambience in no time at all. We will show you all microcement techniques, from exposed concrete with natural cavities to multi-coloured designs with 3D applications.

Universally Applicable

Our microcement is suitable for indoor and outdoor use and can be applied to almost all surfaces such as parquet, tiles, natural stone, plasterboard, metal, ceramic, marble, OSB and more. The material is highly resilient and UV-resistant. At the same time, it remains flexible and breathable.

Completely Waterproof

EPODEX microcement in combination with our polyurethane resin (PU) sealant is waterproof and weather resistant. It is therefore ideal for showers and outdoor areas. The sealing layer is finally rolled onto the hardened microcement. Depending on your requirements, you can choose between our matt and gloss PU sealant.

Instructions for Use

Primer

The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
Sand off any unevenness.
For tiled surfaces, we recommend priming the tiles with our 2K PRIMER for non-absorbent substrates and filling the joints with it.
Allow the primer to dry.

Main Coating

Mix microcement A components in large grain size with the B component in the specified mixing ratio.
Add WB pigment in the recommended quantity to colour the material.
Pour out the material, spread with a trowel and allow to dry.
Sand off any unevenness in the surface greater than 3 mm and vacuum up any sanding dust.
Apply a second coat in the same way. Depending on the desired finish, the microcement can be applied in large or medium grit.

Sealant

Note: For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

Mix PU resin and hardener in the specified mixing ratio and pour into a paint tray.
Apply the material thinly with a foam roller in a crosswise motion and allow to harden. We recommend two coats.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Komponenten (Microcement Medium) Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.

A-Components (Microcement Large) Danger: Contains: PORTLAND CEMENT CLINKER Causes serious eye damage Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/ protective clothing / eye protection / face protection IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Immediately call a POISON CENTER or doctor If skin irritation or rash occurs: Get medical advice / attention. Take off contaminated clothing and wash it before reuse Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area.

A-Components (PU Matt) Contains: N-BUTYL METHACRYLATE: May produce an allergic reaction. Mixture of: a -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-hydroxypoly(oxyethylene); a -3-(3-(2Hbenzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-: May cause an allergic reaction. Decanedioic acid, bis(1,2,2,6,6-pentametyl-4-piperidinyl) ester: May cause an allergic reaction.

B-Components (PU Matt) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.

B-Components (PU Glossy) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.