Epoxy Resins for River Tables & Castings up to 5cm (ECO+/ PRO+)

Epoxy Resins for River Tables & Castings up to 5cm (ECO+/ PRO+)

River tables, lamps, projects with high moulded and cast parts, etc.

Delivery time: 1-3 working days
  • Can be used on all surfaces such as wood, concrete, glass and more
  • Max. thickness per layer: 5cm (heights up to 30cm possible for small castings)
  • Working time: approx. 6h, Curing time: 48-72h
  • Scope of delivery: Resin A and hardener B (Mixing ratio 2:1)
  • Conveniently select a colour to colour the clear epoxy resin

    Legend:
    Ideally suited. X Not suited.
    Processing Characteristics
    Max. Pouring Height at 20°C1 5cm
    Waiting Time until Further Casting2 48-72h
    Gelling Time and Pot Life 6h
    Min. Processing Temperature 15°C
    Recommended Processing Temperature 20°C
    Max. Relative Humidity during Processing 70%
    Max. Material Shrinkage 1%
    Processing Time (at 20°C)
    At Layer Height 0-3mm 360min
    At Layer Height 1cm 360min
    At Layer Height 2cm 360min
    At Layer Height 5cm 240min
    Technical Properties
    Touchable / Accessible after 48-72h
    Completely Chemically Cured after 14 days
    Transparent Resin
    Crystal Clear Curing X (ECO+)
    (PRO+)
    Max. Possible UV Stabilisation3 X (ECO+)
    (PRO+)
    Self-Venting
    Bubble Free
    Self-Leveling
    Solvent-Free
    VOC Free4 X (ECO+)
    (PRO+)
    BPA Free5
    Plasticiser Free (Phthalate)
    Resistant to Chemicals
    Scratch Resistant6
    Doming Effect (Depth Effect)
    Miscible with all EPODEX Colours (Except WB PIGMENT)
    High Adhesion
    Density (g/cm)3 1.1
    Viscosity (mPa·s) 350
    Max. Heat Deflection Temperature7 60°C
    Min. Heat Deflection Temperature -30°C
    SHORE Hardness after Curing (D1) 80
    Storage Temperature 15-30°C
    Shelf Life 12 Months
    Shelf Life after Opening8 6 Months
    1. Casting above the maximum pouring height per process is not recommended. The resin may boil as a result of the reaction and yellowing, cracking and deformation can occur. By reducing the temperature (room, substrate, material temperature to e.g. 15 °C and reducing the area to e.g. 10x10cm, casting heights of up to 30cm can be achieved in one casting process
    2. There is no maximum time limit to pour the next layer.
    3. No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    4. When properly used and completely cured, it is VOC free..
    5. According to formula without free BPA.
    6. Our epoxy resin systems have a high scratch resistance, but are not completely scratch-resistant. Scratch resistance can be increased by using a top coat. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.
    7. The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.
    8. If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months.

    PU Topcoat

    For a more scratch-resistant surface with increased UV protection, we recommend ordering our satin-matt 2-component polyurethane resin (2K PU resin) as a topcoat. The PU resin is highly durable and can be easily rolled onto the epoxy resin, wood, cement, concrete and much more with a foam roller in two thin layers (with max.150µm layer thickness).

    Properties

    • Can be used as epoxy, wood, concrete, microcement, acrylic, parquet, laminate and more
    • Properties: odourless, highly durable, waterproof, UV-stable, for indoor and outdoor use.
    • For rolling on in thin layers (roll coats): Max.150µm/coat
    • Consumption: approx.100g/m²
    • Pot life/processing time: approx. 60min at 1kg material and 20°C
    • Curing time: 20-24hrs.
    • Scope of delivery: Resin A and hardener B
    • Mixing ratio resin and hardener: 10:1 (e.g. 1.000g resin to 100g hardener)
Calculate quantity
Length (cm)
Width (cm)
Height (cm)
Required amount in KG KG
Required amount in g g
SKU: sys-ecoplusproplus Categories: ,

Exceptional quality - Directly from the manufacturer!

Choose now between our two high-quality epoxy resins for river tables, lamps, and other projects with moulded and cast parts up to 5cm casting height. Our ECO+ epoxy resin system is clear, inexpensive, and especially suitable for coloured projects. The PRO+ system stands out due to its extreme clarity and offers the highest possible UV protection. Therefore, it is suitable for both crystal clear and coloured pours.

100% safe epoxy resins

Play it safe with your health! EPODEX epoxy resins are non-toxic (according to GHS06) and not hazardous to health (according to GHS08) according to the hazardous substance legislation of the EU and Switzerland. Our high-quality epoxy resins are 100% solvent-free and, according to the formulation, do not contain any free bisphenol A (i.e., BPA-free), which is harmful to health. This guarantees pleasant processing.
rivertable epoxy resin

No. 1 casting resin with bubble-free curing

No more annoying air bubbles and unevenness! Our epoxy resins self-vent at room temperature. This means that all air bubbles caused by mixing and pouring disappear on their own before the epoxy cures. You do not need a heat gun to remove the bubbles. This means that there is no risk of soot stains on your epoxy resin.
blasenfrei epoxidharz epodex 2

Crystal clear & UV stabilised

Don't compromise and choose the clearest epoxy resin on the market. Get a *money-back guarantee now: If you find a resin that is clearer than our PRO+ epoxy, we'll give you your money back! (*valid up to 30 days after order). Our PRO+ epoxy resin also offers the maximum possible UV protection. In this way, we effectively counteract the UV-induced yellowing of the casting resin.
kristallklares epoxidharz epodex
Equipment

Epoxy Resins for River Tables & Castings up to 5cm (ECO+/ PRO+)

EPODEX epoxy resin is ideal for a variety of applications. From construction, through electrical engineering and furniture coating. Coat your floors, tabletops and other items. Seal pictures or make your own jewellery. No matter your project, we can help you achieve it. Our epoxy resin systems are miscible with all our colours. Application examples can be foand in the gallery.


Instructions for use

  1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin. Mix the resin A-component with the hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
  2. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
  3. Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product may boil in the mixing cup depending on the system and the amount of substance.
  4. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Let the primer cure.
  5. Continue with the main coating in the same way. Processing times, pouring heights and curing times vary depending on the epoxy resin system selected and the application. You can find more detailed information in our information table under the “Select Epoxy System” button on this product page.

Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.


Consumption volumes

Determine the required amount with the help of our epoxy resin “Epoxy calculator” on this page.

Recommended thicknesses when coating floors and other surfaces

  • Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
  • Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
  • Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm

Recommended amount of colouring agent per kg of resin+hardener:

  • Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
  • Transparent dyes (except white, black and grey): 60 drops (1,8g),
  • Transparent white, black and grey dyes: 20 drops dye (0,6g),
  • Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
  • Semi-transparent white: 60 drops of white dye (1,8g),
  • RAL solid colour: 1% (10g),
  • Glitter pigments: 1% (10g)

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.


Ingredients, Security & Danger statements

A-Components (ECO) Warning: 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction mass of 2,2’-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2’-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane Oxirane, mono((C12-14-alkyloxy)methyl)derivs Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid release to the environment. Wear protective gloves/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy constituents. May produce an allergic reaction.

B-Components (ECO+) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.

A-Components (PRO) Warning: Bis-[4-(2,3-epoxipropoxi)phenyl]propane Oxirane, mono[(C12-14-alkyloxy)methyl] derivative Pentamethyl piperidyl sebazate Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid breathing dust/fume/gas/mist/vapours/spray. Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. Collect spillage.

B-Components (PRO+) Danger: Polyoxypropylene triamine Harmful if swallowed or in contact with skin Causes serious eye damage. Toxic to aquatic life with long lasting effects Wash skin thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Call a POISON CENTRE/doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Collect spillage.

4.7 67 reviews
1
0%
2
0%
3
0%
4
25%
5
75%

Pictures from client projects

Leave your review
Rating