CONCRETE PAINT 1K | All Colours

£19.99

Can be used on all surfaces such as concrete, screed, wood and more
Note: For heavily stressed wall and floor , as well as surfaces with permanent water contact, we recommend our waterproof Concrete Paint 2K.
Properties: low odour, abrasion-resistant, UV-resistant, high coverage
Consumption: 100-130g/m²
Application instructions can be found on this product page

Properties

Application
Product Description	Concrete paint, stone paint, wall paint, floor paint
Scope of Application	Normally stressed walls and floors made of concrete, cement, plaster, wood and masonry
Field of Application	Indoor and covered outdoor
Method of Application	Paint, roll, spray
Consumption*	approx. 140g/m²
Range/Yield*	approx. 7m²/kg
Odour Unfolding during processing	Low (odourless)
Spray and Drip Behaviour	Very low (no splashes)
Processing Temperature	min. 8°C object and ambient temperature
Optimal Processing Temperature	20°C
Mixing Ratio by Weight Resin (A): Hardener (B)	No mixing ratio, as one-component product
Pot Life at 20°C	No pot life available
Technical Properties
Basic Compound	Pure acrylate
Gloss Level	satin gloss
Consistency	Viscous (drip resistance, ensures easy and clean application)
Opacity according to DIN EN 13300*	High (class 1-2, 6-8m² per litre)
Coating's Advantages	*abrasion-resistant, hard-wearing, scrub-resistant
Wet abrasion resistance DIN EN 13300*	<5μm to 20μm (class 2)
Water vapour diffusivity DIN EN 1062-1	Medium (Class 2; diffusion-open; sd-value: <0.5m)
Diffusion-open, Breathable	Yes
Colour Resistency	High
Colour Intensity	High
Paint's Structural Finish	Fine structure, even coating pattern
UV-resistant	Yes
Solvent-free	No
Plasticiser-free	Yes
VOC-free	No
Susceptible to abrasion marks and shiny spots (so-called writing effect)	Low (Touch-Protect-System)
Environmentally Friendly	Yes
Proportion of Binder	High (min. 20%)
Proportion of Pigment	High (colour paste content: min. 10%)
Density (g/cm³)	1,3
pH-value	approx. 8.2-9.2
Maximum Grain Size	fine (≤ 100 µm)
Dilutable	as primer max. 20% water
Tool Cleaning	Immediately after use with water
Storage	cool, dry and frost-free
Max. Storage Temperature	25°C

*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.

1. Select colour