Weatherproof Paint | Weatherproof Varnish | All Colours
- It is ideal to seal and paint various material such as wood indoors or outdoors.
- Properties: water-based, odourless, abrasion and weather resistant
- Gloss Level: Satin Matt
- Consumption Volumes: approx. 120g-150/m²
- Application instructions can be found on this product page
1. Select colour
2. Select quantity (m²) for 1 coat
Accessories kit (11 items) (Optional): 
Accessories kit (11 items)
- 1x Flat Brush 5cm
- 1x Foam Rollers 5 & 10cm + handle
- 1x Paint Tray 16cmx30cm
- 1x Exchangeable insert for paint tray 16x30cm
- 2x Sandpaper P180
- 1x Sanding Block
- 1x Stir Stick
- 1x Masking Tape 3cmx50m
EPODEX ACRYLIC PROTECT+
EPODEX ACRYLIC PROTECT+ is universally applicable. This varnish can be used for various indoor and outdoor applications.This product can be used as:
- All-Weather Varnish/Paint
- Wood Varnish/Paint
- Metal Varnish/Paint
- Plastic Varnish/Paint
- Fence Paint
- Wooden Facade Paint
- Balcony Paint
EPODEX ACRYLIC PROTECT+ is water-based, odourless, abrasion and weather resistant. Due to its special protective formula, EPODEX ACRYLIC PROTECT provides long-term protection against moisture and UV rays.
Consumption Volumes:
120-150g/m² par coating on smooth and non-absorbent surfaces. On highly absorbent surfaces, we recommend priming the surface beforehand (e.g. with an undercoat) to prevent the varnish from being absorbed.
Instructions for Use
- Sand the substrate to improve the varnish adhesion. To do so, use EPODEX sandpaper.
- Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
- For uncoated substrates, it is recommended to apply a suitable primer (for wood, apply a coat of colourless EPODEX ACRYLIC PROTECT+ diluted with 5% water; for gypsum, apply e.g. a paint undercoat; for metal, apply e.g. zinc).
- Mix well before use.
- Apply a coat of varnish with a brush or foam roller and let the it dry (approx. 8h at 20°C).
- Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
Recommendations: Processing temperature: The room and substrate temperatures must be at least 8°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. To achieve a lower viscosity, dilute the varnish with up to 5% water. Clean tools with water immediately after use.
EPODEX ACRYLIC PROTECT+ is not block resistant and is therefore not recommended for varnishing windows, doors etc. as well as for previously painted or varnished surfaces.
EU limit value: (Cat. A/d): 130g/L (2010), max. 30g/L VOC
Customer Service:
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
Warning: 1,2-Benzisothiazol-3(2H)-on 2-Methyl-2H-isothiazol-3-one May cause an allergic skin reaction If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Avoid release to the environment. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations.
Related Products
TILE PAINT 2K | All Colours
For heavily used wall and floor tiles as well as tiles with permanent water contact.
4.8
4.8
4.8
4.7