2K Polyurethane Resin in Gloss and Matt Finishes | Yellow and Orange Colours

2K Polyurethane Resin in Gloss and Matt Finishes | Yellow and Orange Colours

Coating of floors, walls and other surfaces and sealing of epoxy resin, micro cement, acrylate, parquet, laminate and much more.

19 reviews
Delivery time: 1-3 working days
  • Can be used on all surfaces such as epoxy, wood, concrete, microcement, acrylic, parquet, laminate and more
  • Properties: odourless, highly durable, waterproof, UV-stable, for indoor and outdoor use.
  • For rolling on in thin layers (roll coats): Max.150µm/coat
  • Consumption: approx.100g/m²
  • Pot life/processing time: approx.60min at 1kg material and 20°C
  • Curing time: 20-24hrs.
  • Scope of delivery: Resin A and hardener B (mixing ratio: PU-glossy 10:2; PU-matt 10:1)
  • Application instructions can be found on this product page
Product Properties
Application
Product Name PU - matte | PU - glossy
Product Type Polyurethane resin (A) + Polyurethane Hardener (B)
Examples of Application Areas Topcoat, sealant on epoxy resin, micro cement, acrylate, parquet, laminate and much more. Coating of floors, walls and other surfaces. For indoor and outdoor areas.
Application To roll on the surface in thin layers.
Mixing Ratio by Weight A:B PU matte: 10:1 (for example: 10g A + 1g B) - PU glossy: 10:2 (for example: 10g A + 2g B)
Coating Height per Process at 20°C 100µm (Micrometer) = 0,1mm | Consumption: 50g/m², Max.100g/m² | 2 coats are necessary.
Waiting Time until further Coating Min: 8h, Max: 24h | To apply a new layer after 24h, first sand to increase adhesion
Pot Life at 20°C 60min
Processing Time/Geling Time at 20°C 60min
Drying/Hardening Time at 20°C 20-24h | Chemical Hardening: 7 days
Processing Temperature Min: 10°C | Opt: 20°C | Max: 25°C
Container Size PU matte: A: 0,5kg | 1kg | 5kg & B: 0,05kg | 0,1kg | 0,5kg - PU glossy: A: 0,5kg | 1kg | 5kg & B: 0,1kg | 0,2kg | 1kg
Characteristics PU matte: Clear, unpigmented, matte - PU glossy: Clear, unpigmented, glossy

    Particularly for absorbent and dark surfaces, we recommend applying our special primer in advance. This applies primarily when using polyurethane resin in light and brilliant colours such as white, yellow, red and orange.

Equipment
SKU: sys-pu-go Categories: ,

2K PU Resin: Ultimate Protection for all Surfaces!

With our water-based, two-component polyurethane resin in gloss and matt, you can coat and seal your surfaces in no time at all. Simply roll on in two thin layers and you're done! The polyurethane resin protects your surfaces from scratches, water and chemicals. In addition, the resin is UV-stable, i.e., any yellowing of the material by UV rays is excluded. This makes the product particularly attractive for outdoor use, as well as light-flooded indoor areas with direct sunlight.

100% Safe Polyurethane Resin - Made in Germany

Play it safe with your health! EPODEX PU resin in gloss and matt are non-toxic (according to GHS06) and not hazardous to health (according to GHS08) according to the hazardous substance’s legislation of the EU and Switzerland. Our high-quality, water-based polyurethane resin is 100% solvent-free and, according to the recipe, contains no free, harmful bisphenol A (i.e., BPA-free). In addition, we completely avoid isocyanates, which can affect and damage the respiratory tract. A pleasant and safe processing is therefore guaranteed!
flooring polyurethan resin

No. 1 PU Resin for a Perfect Roll-on Coat

No more annoying bumps or orange peel skin! Our polyurethane resins have perfect processing properties. By high-quality fillers and flow additives, the material nestles on the surface like a second skin. This guarantees you a perfect surface finish!
blasenfrei polyurethanharz epodex flooring

Crystal Clear & UV-Stable

Don't compromise and choose the highest quality polyurethane resin on the market. This high-quality product should be applied at ambient and substrate temperatures between +15°C and +20°C.
pu epodex flooring 1
Equipment

Instructions for Use

Primer (optional)

  1. If you do not want to apply the PU resin transparently, we always recommend priming with our PRIMER to avoid high material loss (layer thickness: approx.0.2mm).
  2. The surface should be dust-free, clean and dry. Level out holes and unevenness in advance with a cement-based levelling compound.
  3. Pour the PRIMER into a paint tray after mixing.
  4. Roll the material onto the desired surface with a paint roller.
  5. Allow the primer to dry for approx. 8-12 hours.

Coating and Sealing with PU Resin

  1. Coat the surface with the PU resin.
  2. To do this, mix the PU resin (A) with the appropriate PU hardener (B) in the specified mixing ratio. PU glossy: 10:2 by weight (e.g.: 1kg A + 0.2kg B); PU matt: 10:1 by weight (e.g.: 1kg A + 0.1kg B). Optionally, you can add up to 20% water.
  3. Transfer the mixture to a paint tray and mix again. This way you make sure that resin (A) and hardener (B) mix completely.
  4. If a transparent coating is not desired, mix the supplied WB colour paste with the resin-hardener mixture to colour the transparent mixture. We recommend a colour proportion of approx. 10%, e.g., 100g WB colour paste to 1.1kg or 1.2kg resin+hardener. We recommend mixing smaller quantities of approx.1kg per coat, as the material, is very productive and sets quickly (pot life: 60 min. with 1kg).
  5. Apply the material thinly with a foam roller in a criss-cross pattern. To achieve an even finish, use our scraper grid to scrape off excess material before application. We recommend a layer thickness of max.150µm.
  6. The material can be walked on after approx. 20-24 hours and is completely chemically cured after approx.7 days.

Pro Tip: We recommend adding water to the PU resin when working at high ambient temperatures or when mixing a large quantity in order to avoid an orange peel texture. Please note that adding water increases the drying time and therefore curing time. Adding water to coloured PU alters the true colour and coverage, until the water has completely evaporated.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Components (PU Matt) Contains: N-BUTYL METHACRYLATE: May produce an allergic reaction. Mixture of: a -3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-hydroxypoly(oxyethylene); a -3-(3-(2Hbenzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-x-: May cause an allergic reaction. Decanedioic acid, bis(1,2,2,6,6-pentametyl-4-piperidinyl) ester: May cause an allergic reaction.

B-Components (PU Matt) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.

B-Components (PU Glossy) Warning: Hexamethylene diisocyanate oligomers Benzene, 1,3-diisocyanatomethyl-, polymer with 1,6-diisocyanatohexane, polyethyl hexamethylene-di-isocyanate: May produce an allergic reaction. Harmful if inhaled. Causes serious eye irritation May cause an allergic skin reaction May cause respiratory irritation. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/eye protection/face protection. Call a POISON CENTER/doctor if you feel unwell. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Contains isocyanates. May produce an allergic reaction.

4.8 19 reviews
1
0%
2
0%
3
0%
4
21%
5
79%

Pictures from client projects

Leave your review
Rating
Publish review
Linkedin Whatsapp Mail
Related products
×

2K Polyurethane Resin in Gloss and Matt Finishes | Yellow and Orange Colours has been added to your cart.

There are 0 items in your cart.

View cart Checkout