1K CONCRETE EFFECT for Concrete Design

Decorative levelling compound with concrete optic. Cost-effective alternative to microcement. Ideal for rented flats as it is easy to sand and paint over afterwards.

  • Decorative levelling compound in fine to medium grain size for walls and tiled walls.
  • Can be used on all surfaces such as concrete, metal, plastic, wood, etc.
  • Can be applied to absorbent and non-absorbent substrates in layer thicknesses of 0-10cm
  • Areas of application: Indoors. Outdoors and damp areas with PU sealant
  • Mixing ratio: 5:2 (e.g. 1kg EFFECT powder with 400ml water)
  • Working time: approx. 30 minutes (fast setting)
  • Scope of delivery for 5m²: 5kg EFFECT powder + 2x 100g WB PIGMENT paste to dye the powder
  • Drying Time at 20°C: approx. 24h

1. Select colour

EPODEX Traffic White
EPODEX Light Grey
EPODEX Silver Grey
EPODEX peach
EPODEX Pebble grey
EPODEX Concrete Grey
EPODEX ivory
EPODEX finca
EPODEX sand
EPODEX cappuccino
EPODEX nougat
EPODEX Olive Grey
Show AlldoubleChevron

2. Select quantity

Select quantity
chevronBottom

PU Sealer for Microcement (Optional): info-circle

Select microcement sealer (type)
chevronBottom
Select microcement sealer (quantity)
chevronBottom

Decorative Concrete Optic

EPODEX 1K CONCRETE EFFECT is a special, single-component levelling compound for designing walls, tiles, kitchens, bathrooms, and other areas with a modern concrete look. The material can simply be mixed with water and applied to all surfaces with ease. Achieve a modern design in no time at all and if you get tired of the concrete look, you can simply sand the textured surface smooth by hand with sandpaper and paint over it.

Instructions for Use

  1. The substrate must be stable, dry, and free of dirt, separating agents, and unevenness.
  2. Sand off any unevenness.
  3. Mix CONCRETE EFFECT powder with water in a ratio of 5:2 by weight (e.g. 1kg EFFECT powder with 400ml water).
  4. Add approx. 2% WB PIGMENT, e.g. 2x 100g bottle for 5kg EFFECT powder to 2 litres of water.
  5. Apply material with a trowel. Working Time: Approx. 30min. Consumption Volume: approx. 1kg/m² per 1mm layer thickness. Drying Time: approx. 24hrs
Polyurethane Resin Floors

Waterproof Concrete Look

1K CONCRETE EFFECT is waterproof and weather-resistant in combination with our polyurethane resin (PU) sealant. It is therefore ideal for showers and outdoor areas. The sealant layer is rolled onto the dried CONCRETE EFFECT. You will thus obtain a waterproof surface with a concrete look.

Reviews

5
100%
4
0%
3
0%
2
0%
1
0%
5.0
Based On 11 Reviews

Customer Project Photos

Review attachment by: SimonReview attachment by: AdamReview attachment by: BastianReview attachment by: Kristian BrentReview attachment by: Matias GalaoReview attachment by: Emilia MintzReview attachment by: Emilia MintzReview attachment by: Marcel OlsenReview attachment by: Lucas CoteReview attachment by: Gemma H.
Simon
01.05.2024
Country: PL
Review attachment by: Simon
Adam
02.04.2024
Country: PL
Review attachment by: Adam
Bastian
24.03.2024
Country: FR
Review attachment by: Bastian
Kristian Brent
21.03.2024
Country: UK
Review attachment by: Kristian Brent
Matias Galao
17.03.2024
Country: IT
Review attachment by: Matias Galao
Emilia Mintz
16.03.2024
Country: DE
Review attachment by: Emilia Mintz
Review attachment by: Emilia Mintz

Related Products