Industrial Floor Coating with Epoxy Resin
Coat an Industrial Floor
Start installing your own industrial flooring by thoroughly cleaning the floor and repairing any holes or cracks. Then, mix resin and hardener according to the instructions and use a squeegee or roller to spread the mixed resin on the floor. We recommend starting with a thin primer coat of 0.2-5mm.
The epoxy primer will seal your floor and prevent too much resin from being absorbed. By avoiding material-loss you save money. You have got allow the primer cure before you continue with the main coating of your industrial flooring. The addition of quartz sand increases the compressive strength of the material up to 40 N/mm². After applying the coating resin, curing starts and only after the epoxy resin has fully cured you can start using the floor.


Yannick Schulz
Sie haben Fragen? Ich helfe gerne!

Coloured Industrial Floors
EPODEX offers clear and coloured epoxy resin for your industrial floor. You can choose from a wide range of different colour pigments. All our colours can be mixed with each other, which results in limitless possible to colour your industrial floor. Additionally, you can add flakes to the coating.
By using different colour combinations, you can wipe and brush unique patterns into the epoxy coating to create visual highlights. For this reason, our resin is not only used for industrial floors, but also for floors in hotels, sales areas as well as in hairdressing and nail salons.
We Support Your Industrial Flooring Project
Do you have any questions about our products or do you need support with the application? We are happy to help you! Our specialists will support you from planning to the installation of your industrial flooring. Contact our support team by phone, e-mail or WhatsApp. We look forward to your request!


