TILE PAINT 2K | Red Colours

TILE PAINT 2K | Red Colours

94 reviews
Delivery time: 1-3 working days
  • Area of application: heavily stressed wall and floor tiles, as well as tiles with permanent water contact, e.g., in showers.
  • Note: For wall tiles exposed to normal wear and tear, without permanent water contact, we recommend our more cost-effective Tile Paint 1K.
  • Gloss level: satin matt
  • Properties: odourless, abrasion-resistant, waterproof, UV-stabilised, high coverage
  • Consumption: approx. 220g/m²
  • Working time: approx. 90 min. for 1kg
  • Mixing ratio resin and hardener: 5:1 (e.g., 500g resin to 100g hardener)
Product Properties
Application
Product Description Tile paint, tile varnish
Scope of Application Floor tiles and wall tiles with permanent water contact (e.g. shower).
Field of Application Indoor
Method of Application Paint, roll
Consumption* approx. 220g/m²
Range/Yield* approx. 4.5m²/kg
Odour Unfolding during processing low (after amine)
Spray and Drip Behaviour Very low (no splashes)
Processing Temperature min. 8°C object and ambient temperature
Optimal Processing Temperature 20°C
Mixing Ratio by Weight Resin (A): Hardener (B) 5:1
Pot Life at 20°C 90 minutes at 1kg
Technical Properties
Basic Compound Epoxy resin
Gloss Level satin gloss
Consistency medium viscosity, (drip resistance ensures processing on vertical surfaces)
Opacity according to DIN EN 13300* High (class 1-2, 6-8m² per litre)
Coating's Advantages *abrasion-resistant, hard-wearing, scrub-resistant
Wet abrasion resistance DIN EN 13300* <5μm to 20μm (class 1)
Water vapour diffusivity DIN EN 1062-1 Medium (Class 2; diffusion-open; sd-value: <0.5m)
Diffusion-open, Breathable Yes
Colour Resistency High
Colour Intensity High
Paint's Structural Finish Fine structure, even coating pattern
UV-resistant Yes
Solvent-free Yes
Plasticiser-free Yes
VOC-free Yes
Susceptible to abrasion marks and shiny spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Proportion of Binder High (min. 20%)
Proportion of Pigment High (colour paste content: min. 5%)
Density (g/cm³) 1,4
Maximum Grain Size fine (≤ 100 µm)
Dilutable Not dilutable
Tool Cleaning Immediately after use with acetone/thinner
Storage cool, dry and frost-free
Max. Storage Temperature 25°C
*Consumption, coverage and opacity may vary depending on the substrate (wallpaper, woodchip, concrete, wood etc.), the tool used (foam roller, paint brush, etc.) and the choice of colour. Brilliant yellow, red and orange tones generally have a lower opacity. Several coats may be necessary here.
    • 1x Nitrile Gloves
    • 1x Plastic Drop Cloth 50m2
    • 1x Masking Tape 5cmx50m
    • 2x Sandpaper P180 and Sanding Block
    • 1x PRE-CLEANER Degreaser & Cleaner
    • 1x Stir Stick
    • 1x Flat Brush 5cm
    • 2x Foam Rollers 10cm + handle
    • 1x Foam Roller 25cm + handle
    • 1x Mixing Bucket 12 litres
    • 2x Exchangeable insert for mixing bucket 12 litres
    • 1x Scraper grid

Equipment
SKU: sys-fl-2k-rt Categories: ,

EPODEX 2K Tile Paint

2K Tile Paint is a water-based, odourless epoxy resin-based paint. It consists of a resin component and a hardener component. Both components are mixed together before application.

The 2-component system is ideal for painting wall and floor tiles. The hard-wearing paint is easy to apply thanks to its excellent adhesion properties.

Paint your wall and floor tiles yourself now at an affordable cost. Get tips on colour schemes and modern furnishings from our living room designer in the following video!

Instructions for use - STEP BY STEP

  1. Sand the tiles with sandpaper.
  2. Cover/tape off surfaces that are not to be covered with a plastic drop cloth and masking tape.
  3. Pre-clean and degrease tiles with the EPODEX PRE-CLEANER.
  4. Mix resin (A-component) with hardener (B-component) in a ratio of 5:1 (e.g., 500g resin: 100g hardener). We recommend mixing small quantities of approx. 600g per coat, as the material is very reactive and thickens quickly (pot life: 90min. at 1kg).
  5. Colour the material with the WB pigment supplied and pour it into the paint tray.
  6. Apply material in a criss-cross pattern and allow to dry (approx. 12 hours at 20°C).
  7. We recommend approx. two coats.
  8. If desired, retouch the tile joints with the EPODEX grout pen and ruler.

EPODEX GROUT PEN - Order now!

With the EPODEX Grout Pen, you can paint your grout lines in white or in the classic shade of grey the pen is a special acrylic-based paint for colouring and refreshing tile grout.

Thanks to the flattened tip of the pen, the grout pen adapts to any grout line width and thus ensures quick and clean retouching of the tile grout lines in one single application. For a clean result, we recommend using a ruler.

Recommendations

Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Customer Service

If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

A-Components (TILE PAINT 2K) Danger: Polymer epoxy resin adduct; CAS-No.: 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy compounds. May produce an allergic reaction.

A-Components (TILE PAINT 2K Polar White) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

A-Components (TILE PAINT 2K PASTEL) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

B-Components (TILE PAINT 2K) Warning: 4,4'-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.

Equipment
4.9 94 reviews
1
0%
2
0%
3
0%
4
9%
5
91%

Pictures from client projects

Leave your review
Rating
Publish review
Linkedin Whatsapp Mail
Related products
×

TILE PAINT 2K | Red Colours has been added to your cart.

There are 0 items in your cart.

View cart Checkout