CONCRETE PAINT 2K | All Colours
CONCRETE PAINT 2K | All Colours
Floor sealant/ floor paint for living space, garage, cellar, warehouse and industrial hall
Delivery time: 1-3 working days
- Can be used on all surfaces such as concrete, screed, wood and more
- Material: Epoxy Resin (water-based) to apply with a foam roller
- Properties: odourless, abrasion-resistant, waterproof, UV-stabilised, high coverage
- Working time: approx. 90 min. for 1kg
- Curing Time: 16-24h
- Scope of delivery: epoxy resin and hardener + colouring agents
- Application instructions can be found on this product page
Product Properties
Application | |||
Product Description | Concrete paint, floor paint, wall paint, floor paint | ||
Scope of Application | Highly stressed walls and floors. Use as a garage floor sealant and for floor coating in warehouses and basements. | ||
Field of Application | Indoor and covered outdoor areas | ||
Method of Application | Paint, roll | ||
Consumption* | approx. 220g/m² | ||
Range/Yield* | approx. 4.5m²/kg | ||
Odour Unfolding during processing | low (after amine) | ||
Spray and Drip Behaviour | Very low (no splashes) | ||
Processing Temperature | min. 8°C object and ambient temperature | ||
Optimal Processing Temperature | 20°C | ||
Mixing Ratio by Weight Resin (A): Hardener (B) | 5:1 | ||
Pot Life at 20°C | 60 minutes at 15kg | ||
Technical Properties | |||
Basic Compound | Epoxy resin | ||
Gloss Level | satin | ||
Consistency | Medium viscosity, (drip resistance yes, but processing on vertical surfaces is difficult) | ||
Opacity according to DIN EN 13300* | High (class 1-2, 6-8m² per litre) | ||
Coating's Advantages | *abrasion-resistant, hard-wearing, scrub-resistant | ||
Wet abrasion resistance DIN EN 13300* | <5μm to 20μm (class 1) | ||
Water vapour diffusivity DIN EN 1062-1 | Medium (Class 2; diffusion-open; sd-value: <0.5m) | ||
Diffusion-open, Breathable | Yes | ||
Colour Resistency | High | ||
Colour Intensity | High | ||
Paint's Structural Finish | Fine structure, even coating pattern | ||
UV-resistant | May yellow under continuous, direct and strong UV irradiation | ||
Solvent-free | Yes | ||
Plasticiser-free | Yes | ||
VOC-free | Yes | ||
Susceptible to abrasion marks and shiny spots (so-called writing effect) | Low (Touch-Protect-System) | ||
Environmentally Friendly | Yes | ||
Proportion of Binder | High (min. 20%) | ||
Proportion of Pigment | High (colour paste content: min. 5%) | ||
Density (g/cm³) | 1,5 | ||
Maximum Grain Size | fine (≤ 100 µm) | ||
Dilutable | as primer max. 20% water | ||
Tool Cleaning | Immediately after use with acetone/thinner | ||
Storage | cool, dry and frost-free | ||
Max. Storage Temperature | 25°C |
SKU: sys-beton2k
Categories: 2K Concrete Paint / 2K Stone Paint, All
EPODEX - CONCRETE PAINT 2K
CONCRETE PAINT 2K System is used as a surface sealant and surface coating. This system is suitable for various indoor and covered outdoor applications.
This system can be used as:
This system can be used as:
- Flooring Paint
- Flooring Sealant
- Garage Sealant
- Concrete Paint
- Cement Paint
- Screed Paint
- Plaster Paint
- Stone Paint
Instructions for Use
- The temperature of the room, the substrate and the paint must be at least +15°C.
- Make sure that the substrate is clean, dry and free of any substance that may prevent the paint's adhesion.
- Mix resin (A-component) with hardener (B-component) in a ratio of 5:1 (e.g., 500g resin: 100g hardener). We recommend mixing small quantities of approx. 600g per coat, as the material is very reactive and thickens quickly. Optionally, the mixture can be diluted by adding 20% water.
- To dye the mixture, add approximately 5% WB PIGMENT pigment paste to it. (e.g. 300g colour for 6kg CONCRETE PAINT 2K)
- Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- To prevent the paint from thickening too quickly, pour the mixture into a paint tray immediately after mixing.
- Apply the paint to the desired surface using a foam roller in a criss-cross pattern. We recommend applying the paint in layers of about 0,2-0,3 mm. It is recommended to apply at least 2 coats. Processing time/pot life at 20°C: approx. 60 minutes, at 30°C: approx. 30 minutes.
- Wait at least 12-48 hours before applying the second coat.
- Allow the coating to dry and harden for approx. 20 hours. The curing time depends on the room temperature, the material and the substrate. Can be fully loaded after min. 7 days.
EPODEX Professional Painting Accessories - Order now for £24.99!
Who hasn't experienced this? - Just a quick trip to the DIY store to buy supposedly inexpensive paint and you've already paid more for the professional, lint-free paint roller and other painting accessories than for the paint itself. Not at EPODEX! For us, the total price is what counts! Order our professional painting accessories set now and save up to 45% when comparing prices directly! You'll get everything you need to paint stress-free.
Customer Service
If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
A-Components (CONCRETE PAINT 2K) Danger: Polymer epoxy resin adduct; CAS-Nr.: 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Dispose of contents/container to in accordance with local/regional/international regulations. Contains epoxy compounds. May produce an allergic reaction.
B-Components (CONCRETE PAINT 2K) Warning: 4,4'-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.
B-Components (CONCRETE PAINT 2K) Warning: 4,4'-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.
Equipment