Tiles as Good as New with Tile Paint
With EPODEX Tile Paint, you can revamp your old tiles and save yourself time-consuming renovations. Choose now our Tile Paint 2K for walls and floors and heavily stressed wall tiles, as well as for tiles with permanent water contact and standing water, e.g., in showers.
Tile paint: simple application, convincing result
You don’t like the old tiles in your kitchen any more?
You want to renovate your bathroom without much effort? Then EPODEX has a practical and affordable solution for you! Use our 2K epoxy resin-based paint (for floor tiles and heavily used tiles with standing water). All our paints can be mixed with each other for you to achieve the exact shade you want.
How do I paint My Tiles?
Damaged tiles should be repaired beforehand, for example, with an epoxy filler.
In principle, the tiles should be lightly sanded with sandpaper (grit: P80-P150) and then cleaned thoroughly before being painted on. To ensure that the paint adheres perfectly and that the result is durable, the surface must be rough, clean, and free of grease. Apply EPODEX TILE PAINT following the instructions on each product page.
What to look for with Tile Paint?
There are differences to be taken into account: Silicone joints cannot be painted over with paint because it does not adhere to them. It is therefore advisable to remove silicone joints completely before painting and to renew them with acrylic afterwards.
The situation is different with acrylic joints. These can be painted over without any problems. Grout joints made of mortar can also be painted without any problems. Depending on the size and shape of the tiles, it is advisable to apply the tile paint with a more or less large foan roller. A fine brush can be used for joints and corners but the paint must be rolled on afterwards.
Our Promises
Your needs and wishes always come first for us
High Coverage
Made in Germany
100% Hard-Wearing
Solvent-Free
More than
1000000+
Satisfied customers
Tile paint for wall and floor tiles
Our products have high opacity, so one or two coats are usually enough to make your tiles look new. If there are large colour differences, for example, if you paint dark tiles white, further coats may be necessary. Eventually, the transformation will be perfect, and you can enjoy your new bathroom or kitchen – without any dust or noise!
You should bear in mind that not all tile is the same. Our 2-component paint should be used on the tiled floor. Floor tiles are exposed to heavier loads, which is why not all paints are suitable for painting floor tiles. For wall tiles, a 1-component paint is sufficient, provided the wall is not in constant contact with water.
Do I need help from a Professional to paint The Tiles?
How do I find out How Much Tile Paint I need?
How long does The Tile Paint take to cure?
Inspirations
Projects that have been achieved with our products
