TILE PAINT 2K Hardener (without resin)

Name: TILE PAINT 2K Hardener (without resin)
SKU: sys-fl-2k-hearter
Price: 20 AED
Availability: InStock

TILE PAINT 2K Hardener (without resin)

Delivery time: 1-3 business days | Free shipping on orders over $50

The TILE PAINT 2K Hardener from EPODEX is our silk-gloss, abrasion-resistant tile varnish. The TILE PAINT 2K Hardener is ideal for coating heavily used floor, wall and ceiling tiles and is mixed with the TILE PAINT 2K Resin before application. The special paint is also used for tiles that are in constant contact with water (e.g., showers). Let your tiles shine in a new, modern colour. The scope of delivery includes TILE PAINT 2K hardener without resin. Consumption: 120-150g/m² per application. Application instructions can be found on this product page.

*Quantity of epoxy hardener (B-component)

Calculate Quantity

SKU: sys-fl-2k-hearter Categories: All, Resins or Hardeners

TILE PAINT 2K Hardener (without resin)

The TILE PAINT 2K Hardener (B-component) is mixed with the TILE PAINT 2K Resin (A-component). Both components together form the TILE PAINT 2K epoxy resin system.
It is designed for painting tiles on walls and floors that are subject to heavy wear and tear. This paint is very durable and easy to apply. It is odourless and free of solvents that are hazardous to health.

Consumption Volumes: 120-150g/m² par coating on smooth and non-absorbent surfaces.

Instructions for Use

Sand the substrate to improve the paint adhesion. To do so, use EPODEX sandpaper.
Make sure the substrate is clean and free of grease. To do so, use EPODEX PRE-CLEANER.
Mix the resin A-component with the hardener B-component in a ratio of 5:1 (e.g., 5kg resin: 1kg hardener).
Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
Mix the clear paint with our water-based colour paste WB PIGMENT to tint it. Recommended amount of paste to be added: Add 5% in weight to the paint. (e.g. 300g colour for 6kg TILE PAINT 2K)
Apply a coat of paint with a brush or foam roller and let the it dry (approx. 8h at 20°C). (Pot Life/Processing Time: at 20°C: approx. 50 minutes, at 25°C: approx. 35 minutes)
Reapply as many coats as required to achieve the desired opacity. We recommend applying ca. 2 coats.
As an option, tile joints can be re-done with our practical EPODEX grouting pen.

Recommendations: Processing temperature: The room and substrate temperatures must be between 8°C and 25°C. Do not apply on heated surfaces or in direct sunlight. Drying problems may occur at low temperatures. Clean tools with water immediately after use.

EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Ingredients, Security & Danger statements

B-Components (TILE PAINT 2K) Warning: 4,4′-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.