TILE PAINT 2K | All Colours
TILE PAINT 2K | All Colours
- Area of application: heavily stressed wall and floor tiles, as well as tiles with permanent water contact, e.g., in showers.
- Gloss level: satin matt
- Properties: odourless, abrasion-resistant, waterproof, UV-stabilised, high coverage
- Consumption: approx. 220g/m²
- Working time: approx. 90 min. for 1kg
- Mixing ratio resin and hardener: 5:1 (e.g., 500g resin to 100g hardener)
Application | |||
Product Description | Tile paint, tile varnish | ||
Scope of Application | Floor tiles and wall tiles with permanent water contact (e.g. shower). | ||
Field of Application | Indoor | ||
Method of Application | Paint, roll | ||
Consumption* | approx. 220g/m² | ||
Range/Yield* | approx. 4.5m²/kg | ||
Odour Unfolding during processing | low (after amine) | ||
Spray and Drip Behaviour | Very low (no splashes) | ||
Processing Temperature | min. 8°C object and ambient temperature | ||
Optimal Processing Temperature | 20°C | ||
Mixing Ratio by Weight Resin (A): Hardener (B) | 5:1 | ||
Pot Life at 20°C | 90 minutes at 1kg | Technical Properties | |
Basic Compound | Epoxy resin | ||
Gloss Level | satin gloss | ||
Consistency | medium viscosity, (drip resistance ensures processing on vertical surfaces) | ||
Opacity according to DIN EN 13300* | High (class 1-2, 6-8m² per litre) | ||
Coating's Advantages | *abrasion-resistant, hard-wearing, scrub-resistant | ||
Wet abrasion resistance DIN EN 13300* | <5μm to 20μm (class 1) | ||
Water vapour diffusivity DIN EN 1062-1 | Medium (Class 2; diffusion-open; sd-value: <0.5m) | ||
Diffusion-open, Breathable | Yes | ||
Colour Resistency | High | ||
Colour Intensity | High | ||
Paint's Structural Finish | Fine structure, even coating pattern | ||
UV-resistant | Yes | ||
Solvent-free | Yes | ||
Plasticiser-free | Yes | ||
VOC-free | Yes | ||
Susceptible to abrasion marks and shiny spots (so-called writing effect) | Low (Touch-Protect-System) | ||
Environmentally Friendly | Yes | ||
Proportion of Binder | High (min. 20%) | ||
Proportion of Pigment | High (colour paste content: min. 5%) | ||
Density (g/cm³) | 1,4 | ||
Maximum Grain Size | fine (≤ 100 µm) | ||
Dilutable | Not dilutable | ||
Tool Cleaning | Immediately after use with acetone/thinner | ||
Storage | cool, dry and frost-free | ||
Max. Storage Temperature | 25°C |
EPODEX 2K Tile Paint
The 2-component system is ideal for painting wall and floor tiles. The hard-wearing paint is easy to apply thanks to its excellent adhesion properties.
Paint your wall and floor tiles yourself now at an affordable cost. Get tips on colour schemes and modern furnishings from our living room designer in the following video!
Instructions for use - STEP BY STEP
- Sand the tiles with sandpaper.
- Cover/tape off surfaces that are not to be covered with a plastic drop cloth and masking tape.
- Pre-clean and degrease tiles with the EPODEX PRE-CLEANER.
- Mix resin (A-component) with hardener (B-component) in a ratio of 5:1 (e.g., 500g resin: 100g hardener). We recommend mixing small quantities of approx. 600g per coat, as the material is very reactive and thickens quickly (pot life: 90min. at 1kg).
- Colour the material with the WB pigment supplied and pour it into the paint tray.
- Apply material in a criss-cross pattern and allow to dry (approx. 8 hours at 20°C).
- We recommend approx. two coats.
- If desired, retouch the tile joints with the EPODEX grout pen and ruler.
EPODEX GROUT PEN - Order now!
Thanks to the flattened tip of the pen, the grout pen adapts to any grout line width and thus ensures quick and clean retouching of the tile grout lines in one single application. For a clean result, we recommend using a ruler.
Recommendations
EU limit value: (Cat. A/d): 140g/L (2010), max. 140g/L VOC
Customer Service
Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.
Ingredients, Security & Danger statements
A-Components (TILE PAINT 2K Polar White) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
A-Components (TILE PAINT 2K PASTEL) Danger: Polymer Epoxy Resin Amin adduct; CAS-Nr. 238080-05-2 Epoxy Amin Adduct; CAS-Nr. 260549-92-6 Causes serious eye damage. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention. Dispose of contents/container to in accordance with local/regional/international regulations. Contains titanium dioxide: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
B-Components (TILE PAINT 2K) Warning: 4,4'-methylene diphenyldiglycidyl ether p-tert-butylphenyl-1-(2,3-epoxy)propyl ether Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Toxic to aquatic life with long lasting effects Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container to in accordance with local/regional/international regulations.