Tile Paint

Tiles as Good as New with Tile Paint

With EPODEX Tile Paint, you can revamp your old tiles and save yourself time-consuming renovations. Choose now between our Tile Paint 1K for normally stressed tiled walls and our Tile Paint 2K for floors and heavily stressed wall tiles, as well as for tiles with permanent water contact and standing water, e.g., in showers.

Tile paint: simple application, convincing result

You don’t like the old tiles in your kitchen any more?

You want to renovate your bathroom without much effort? Then EPODEX has a practical and affordable solution for you! All you have to do is consider whether you need 1K acrylic-based paint (for walls without permanent water contact) or 2K epoxy resin-based paint (for floor tiles and heavily used tiles with standing water). All our paints can be mixed with each other for you to achieve the exact shade you want.

How do I paint My Tiles?

It is important to prepare your tiles properly before painting them. Before you start, make sure your tiles are intact, preferably without cracks or breaks.

Damaged tiles should be repaired beforehand, for example, with an epoxy filler.

In principle, the tiles should be lightly sanded with sandpaper (grit: P80-P150) and then cleaned thoroughly before being painted on. To ensure that the paint adheres perfectly and that the result is durable, the surface must be rough, clean, and free of grease. Apply EPODEX TILE PAINT following the instructions on each product page.

What to look for with Tile Paint?

Unlike, for example, a completely seamless floor made of epoxy resin, tiled walls and floors have joints that cannot be ignored.

There are differences to be taken into account: Silicone joints cannot be painted over with paint because it does not adhere to them. It is therefore advisable to remove silicone joints completely before painting and to renew them with acrylic afterwards.

The situation is different with acrylic joints. These can be painted over without any problems. Grout joints made of mortar can also be painted without any problems. Depending on the size and shape of the tiles, it is advisable to apply the tile paint with a more or less large foan roller. A fine brush can be used for joints and corners but the paint must be rolled on afterwards.

Our Promises

Your needs and wishes always come first for us

High Coverage

Our paints have a class 1-2 and thus the best coverage available. Often one coat is sufficient to reach full coverage.

Made in Germany

We are complying to the highest quality standards and always reaching out for more by constantly improving our existing products.

100% Hard-Wearing

All our paints are abrasion resistant and washable. Our two-component paint is also completely abrasion and water resistant.

Solvent-Free

Our paints are water-based and completely solvent-free. This guarantees a safe and enjoyable application.
Any questions? I am glad to help!

More than

1000000+

Satisfied customers

4.77/5

Based on 5,633 ratings

Website very informative, product selection is also very interesting, the order was also delivered in a few days.

24.02.2024

Everything great! Especially the telephone contact. I would find it helpful if more videos were included. Explanations of what you have to consider.

28.02.2024

There was a small problem with my last delivery, which was fixed immediately after a short call without any problems.

03.03.2024

Transparency
Quality
Customer Service

Tile paint for wall and floor tiles

Our products have high opacity, so one or two coats are usually enough to make your tiles look new. If there are large colour differences, for example, if you paint dark tiles white, further coats may be necessary. Eventually, the transformation will be perfect, and you can enjoy your new bathroom or kitchen – without any dust or noise!

You should bear in mind that not all tile is the same. Our 2-component paint should be used on the tiled floor. Floor tiles are exposed to heavier loads, which is why not all paints are suitable for painting floor tiles. For wall tiles, a 1-component paint is sufficient, provided the wall is not in constant contact with water.

Which Accessories do I need to apply The Tile Paint?

On each product page you will find an accessories kit including everything needed to apply the tile paint. The kits differ for the 1K and 2K paint. More accessories are needed for the 2K TILE PAINT as components must be mixed before use.

Do I need help from a Professional to paint The Tiles?

All our tile paints have a professional quality that will completely transform your old tiles. The instructions for use are very simple and can be done by a beginner. There is no need to hire a craftsman to repaint tiles.

How do I find out How Much Tile Paint I need?

Measure the area to be painted and then decide whether you need one or two coats. Our paints are highly opaque and usually one or two coats are sufficient. You can easily select the quantity directly in m² on each product page. The quantity displayed is for one coat, double the quantity if you wish to apply 2 coats.

How long does The Tile Paint take to cure?

The curing and drying time depends on the paint used. Please refer to the instructions for use on each product page.

Inspirations

Projects that have been achieved with our products

Cart
FOX v.2.4.1.9