Microcement set for tiles incl. primer & levelling compound 2.5m² (18kg) to 301m² (990kg)

Microcement set for tiles incl. primer & levelling compound 2.5m² (18kg) to 301m² (990kg)

Premium quality microcement for all types of indoor and outdoor tiles. For wall tiles and floor tiles in kitchens, bathrooms, hallways and more

Delivery time: 1-3 business days | Free shipping on orders over $50
  • Design levelling compound for tiles
  • Material: Microcement (A-component) and acrylic resin (B-component), as well as primer and levelling compound
  • Properties: High load-bearing capacity, weatherproof, UV-stable, odourless
  • Areas of application: Interior & exterior as well as damp rooms with PU sealing
  • Curing time per layer at 20°C: approx. 8h
  • Scope of delivery for 3.5m² wall: 7kg medium microcement + 2kg acrylic resin + colourants + 5kg primer & putty
  • Scope of delivery for 3.5m² floor: 7kg large microcement + 7kg medium microcement + 4kg acrylic resin + colourants + 16kg primer and levelling compound
  • Anwendungshinweise auf dieser Produktseite.
Product Properties
Application
Product Description Microcement, nano concrete, design levelling compound
Area of Application Area of Application Close to all walls and floors, furniture etc., walls, facades, stairs, industrial halls, cellars etc.
Field of Application Indoor & Outdoor use and damp rooms
Method of application Trowel
Self-levelling minimal; must be spread and smoothed out with a trowel
Consumption Quantity Floor Layer 1 (Large): 2.1kg/m², Layer 2 (Large or Medium): 1.2kg/m²
Consumption Quantity Wall Layer 1 (Medium): 1.2kg/m², Layer 2 (Medium or Fine): 1kg/m²
Odour development during application Low (according to amine)
Spray and Drip Behaviour Depending on processing consistency, dripping possible on wall surfaces
Application Temperature Substrate and ambient temperature must be min. 10°C and max. 30°C
Optimum Processing Temperature 20°C
Mixing ratio by weight Powder (A): Liquid (B) Fine: 100:35, Medium: 100:20, Large: 100:25
Pot Life at 20°C 120 minutes for 10kg
Recommended layer thickness fine 1mm; medium and large 1.5mm
Recommended number of layers min. 2 layers
Waiting time between layers max. 24 hours
Waiting time before painting over with another product after 48 hours
Primer on absorbent substrates Deep Primer 1K recommended
Primer on non-absorbent substrates Primer 2K recommended
Max. humidity level during application 60%
Slip Resistance Class not defined (we recommend applying the PU sealant with 1% micro-glass beads in wet areas)
Technical Properties
Material Base Cement
Component A Powder for Microcement and Quartz
Component B Acrylic Resin in Water Dispersion
Gloss Level Satin matt. High gloss and dull matt possible with PU sealer
Consistency High viscosity, viscosity can be adjusted depending on the amount of LIQUID (B) added.
Coverage Highly Opaque
Surface Finish Highly durable, abrasion-resistant, hard-wearing, scrub-resistant
Scratch Resistance/Abrasion Resistance Reinforced by the application of PU and recommended for heavily used surfaces and wet areas
Compressive Strength after 7 days ≥ 12.0 MPa (EN 13892-2)
Compressive Strength after 28 days ≥ 20 MPa (EN 13892-2)
Flexural Strength after 7 days 4.0 MPa (EN 13892-2)
Flexural Strength after 28 days 7.0 MPa (EN 13892-2)
Fire resistance class Efl EN 13501-1
Shore Hardness ≥80
Elasticity1 Not elastic; glass fibre mesh must be incorporated on substrate susceptible to vibrate
Open to diffusion, breathable Yes (unless 2 or more layers of PU sealant are applied)
Application in Wet Areas Not recommended without Pu sealant in wet areas
Colour Fastness High
Colour Intensity High
Colour Appearance For walls: Fine/medium texture - For floors: Medium/Large texture
UV-resistant UV-Stable
Solvent-Free Yes
Plasticiser-Free Yes
VOC-Free Yes
Susceptible to abrasion marks and gloss spots (so-called writing effect) Low (Touch-Protect-System)
Environmentally Friendly Yes
Pigment Content 2-10% depending on desired colour intensity, recommended 2%
Density (g/cm³) 800 - 1300 kg/m³
Maximum Grain Size Large (450µm), Medium (330µm), Fine (80µm)
Dilutable Fine: max. 100:40, medium: max. 100:23, large: max. 100:28
Tool Cleaning Tool Cleaning Immediately after use with acetone/thinner
Chemical Resistance Acids, alkalis and chlorine should be avoided
Surface Cleaning Light surfactants (do not use acidic or chlorinated cleaners or alkaline solutions)
Storage Temperature Airtight, cool, dry, and frost-free
Max. Storage Temperature 25°C
Min. Storage Temperature 10°C
Minimum Shelf Life Unopened 12 months, Open 6 months
  1. If the substrate presents expansion joints, these must be taken into account when applying microcement. The expansion joint must either be reinforced with fibre glass mesh or a joint must be included into the microcement. Rooms larger than 50m² should always include expansion joints. Ignoring existing expansion joints or not including them when needed can lead to the microcement cracking.

    For damp rooms, surfaces in direct contact with water and heavily used surfaces (high mechanical stress, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX polyurethane resin (PU resin) in matt or glossy.

Add Accessories
SKU: sys-micro-primer Categories: ,

Microcement Design

EPODEX microcement is a special levelling compound for designing floors, walls, stairs, tables, and other surfaces in a modern seamless design. Create a unique, contemporary ambience in no time at all. We will show you all microcement techniques, from exposed concrete with natural cavities to multi-coloured designs with 3D applications.

Universally Applicable

Our microcement is suitable for indoor and outdoor use and can be applied to almost all surfaces such as parquet, tiles, natural stone, plasterboard, metal, ceramic, marble, OSB and more. The material is highly resilient and UV-resistant. At the same time, it remains flexible and breathable.

Completely Waterproof

EPODEX microcement in combination with our polyurethane resin (PU) sealant is waterproof and weather resistant. It is therefore ideal for showers and outdoor areas. The sealing layer is finally rolled onto the hardened microcement. Depending on your requirements, you can choose between our matt and gloss PU sealant.
polyurethan harz boden resin a+
Add Accessories

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Microcement set for tiles incl. primer & levelling compound 2.5m² (18kg) to 301m² (990kg)”

Use one of the allowed file type: jpg,png,mp4.

    Linkedin Whatsapp Mail
    Related products
    ×

    Microcement set for tiles incl. primer & levelling compound 2.5m² (18kg) to 301m² (990kg) has been added to your cart.

    There are 0 items in your cart.

    View cart Checkout